Quick Guide to RFID Tag and Parking Label Installation
1
Thoroughly clean and dry the surface of the upper central portion of the interior windscreen (the area behind the rear view mirror without UV-proof metallic coating). Please note that the RFID tag MUST be placed in the area behind the rear-view mirror. (We recommend that the parking label be placed in the inside upper left-hand corner; however, you may choose to place it anywhere on the interior windscreen that is thoroughly clean and dry.)
2
Position the RFID tag, facing outward, 5cm away from the upper top edge of the central portion of the interior windscreen, in the area behind the rear view mirror (the area behind the rear view mirror without UV-proof metallic coating). Once properly aligned, place the corresponding electrostatic label on top and press firmly, using your fingertips to ensure that there are no air bubbles between it and the windscreen.
3
Next, position the parking label, facing outward, in your desired location on the interior windscreen. Place the corresponding electrostatic label on top and press firmly, using your fingertips to ensure that there are no air bubbles between it and the windscreen.
* Please note that the parking label illustrated above is for reference only. Your parking label may look slightly different.
Check to make sure you have done the following:
- Ensured that the vehicle numbers on the small envelopes are correct and the RFID tags have the same tag numbers as printed on the envelopes.
- Affixed BOTH the RFID tag and parking label onto your vehicle.
